It depends on the pathway you choose. The Safe Rite NSW owner builder course takes about 10–12 hours on the Assessment Only pathway (for people with existing building knowledge), about 50–60 hours on the Self-paced Learning pathway (for beginners), and a time that varies with your experience on the Combination pathway. The course is fully online and self-paced, and you can attempt the assessments at any time.
As of November 2026. This is general information. Check the official pages linked below before you enrol.
Owner builder course pathways at a glance
| Pathway | Who it suits | About how long |
|---|---|---|
| Option 1: Assessment Only | People with existing building knowledge | About 10–12 hours |
| Option 2: Self-paced Learning | Beginners | About 50–60 hours |
| Option 3: Combination | People with some knowledge or experience | Varies with your experience |
The course is fully online and self-paced. You can attempt the assessments at any time, and re-attempt them at no extra cost.
The three options in more detail
- Option 1: Assessment Only. For students who believe they have the knowledge and skills to attempt the assessments directly, without studying the course materials. It takes approximately 10–12 hours, including the required knowledge assessments, learning activities and online meeting.
- Option 2: Self-paced Learning. For students with little or no knowledge, experience or skills related to the course. You download the course materials and study at your own pace before attempting the assessments. It takes approximately 50–60 hours, including study time, knowledge assessments, learning activities and online meeting.
- Option 3: Combination of both. For students with some knowledge, experience or skills. You can refer to the learning materials at any time to fill gaps. The time varies with your circumstances, such as your existing experience, knowledge and skills.
In Safe Rite’s survey results, over 99.1% of owner builders in NSW are over the age of 25. Many participants may already have maturity, basic knowledge and experience they can apply to some or all of the units of competency, which can reduce the time the course takes.
What the course covers: the 5 units of competency
The NSW Government’s owner-builder page says the education requirement is five units of competency, and Service NSW says it applies if the cost of the building work is $20,000 or more. Here is what each unit means on a real build:
- CPCCWHS2001 Apply WHS requirements, policies and procedures in the construction industry. As the person running the site, you carry safety responsibilities. This unit is about knowing them and planning for them.
- CPCCOM2001 Read and interpret plans and specifications. You can check what is being built against the approved plans, and brief your trades accurately.
- CPCCCM1011 Undertake basic estimation and costing. It helps you build a realistic budget and compare quotes line by line.
- CPCCOM1013 Plan and organise work. Sequencing trades, orders and inspections keeps the build moving.
- CPCCOM1014 Conduct workplace communication. Clear instructions and records with trades, suppliers and certifiers help prevent disputes.
To see how the education requirement fits into the permit application, read our guide to how to get an owner builder permit in NSW.
Why course times vary
Three things set how long you take:
- Your existing experience. If you already work in or around building, you may know parts of some units already.
- The pathway you choose. Assessment Only suits students who believe they have the knowledge and skills to attempt the assessments directly. Self-paced Learning suits students with little or no experience, who study the course materials before the assessments. The Combination pathway suits students with some experience, who can refer to the learning materials whenever they need to fill a gap.
- Your own pace. The course is fully online and self-paced, and you can attempt the assessments at any time.
Consumer warning: “complete in under 3 hours” and “100% pass”
Some providers advertise the NSW owner builder course as something you can complete in “less than 3 hours” with a “100% pass rate” or “guaranteed pass”. Safe Rite believes these claims are false and misleading. The course covers five units of competency that you will use to manage a build worth hundreds of thousands of dollars. Learning to estimate, plan, communicate and manage safety takes time, and the assessments check that you can apply each unit.
In our experience, some students have signed up with other providers and then been dissatisfied with shallow content or poor-quality materials, resources or support.
ASQA, Australia’s national training regulator, has looked closely at course length and guarantees:
- ASQA’s Users’ Guide to the Standards for RTOs 2015 says providers should not guarantee that a student will be issued a qualification or statement of attainment, and should check that they do not claim a qualification can be achieved in unrealistically short time frames.
- Its 2017 review, A review of issues relating to unduly short training, found that concern about unduly short training is widespread and longstanding. It also found that more than a quarter of the 11,677 advertisements it examined on training providers’ websites for training package qualifications showed a duration below the minimum of the Australian Qualifications Framework volume of learning range.
- ASQA’s 2025-26 risk priorities included shortened course duration. ASQA says marketing courses with unrealistically short durations misrepresents the actual time needed to achieve competency. Its current priority on training quality lists inadequate duration and assessment-driven delivery as a key focus.
So when any course advertises a very short completion time or a guaranteed pass, it is reasonable to ask how all five units are covered and assessed. The checklist below helps.
Questions to ask any course provider
- Is it a registered training organisation (RTO), and can you check it? The NSW Government says to make sure the provider is an RTO before you enrol. You can search the National Training Register at training.gov.au.
- Which units of competency will appear on your Statement of Attainment? They should be the five units listed above.
- Does it promise a guaranteed pass or a very short completion time? Ask how all five units are covered and assessed.
- What does the course include? Ask about worked examples, templates and trainer support.
- Is it realistic to learn how to do a renovation or build a house in “under 3 hours”?
- Could an unrealistically short course, with poor-quality training, cost me tens of thousands of dollars, or even hundreds of thousands, in mistakes on my build?
Nobody with limited or no prior experience in building and construction can learn five units of competency, and gain the skills and knowledge needed for the basics of renovation work or residential construction, in “less than 3 hours”. This is just false and misleading.
Concerned about a course provider? Contact ASQA
If you see a provider making claims that look false or misleading, you can report it to ASQA. ASQA says you can make a confidential or anonymous report.
- ASQA tip-off line: 1300 644 844 (from outside Australia: +61 2 5933 2022). ASQA lists weekday phone hours, so check its contact page for current times.
- Report online: ASQA: Make a report.
- General enquiries: 1300 701 801 (from overseas: +61 3 8613 3910).
Frequently asked questions
Is the course self-paced?
Yes. It is fully online, and you can study at your own pace. You can attempt the assessments at any time.
Can I re-sit the assessments?
Yes. You can re-attempt the assessments at no extra cost, and there are no hidden fees to re-sit them.
Do I need a White Card too?
For the permit, yes. The NSW Government says a current White Card is a mandatory requirement for all owner-builder permit applications. You do not need a White Card to enrol in the Safe Rite course. White Card training is a separate, shorter course. In our experience it takes about 6–7 hours for one unit of competency; the owner builder course covers five.
Do I need the course for every project?
No. Service NSW says the education requirement applies if the cost of the building work is $20,000 or more. See our owner builder FAQs for more answers.
Which pathway should I choose?
Choose Assessment Only if you already have the knowledge and skills, Self-paced Learning if you have little or no experience, and the Combination pathway if you have some experience and want the materials on hand to fill gaps.
Ready to start?
The Safe Rite NSW Owner Builder Course (RTO 45002) is fully online and self-paced. Register free and pay $189 when you pass, or choose PRO Level at $170 paid upfront.
Sources
- NSW Government, How to apply for an owner-builder permit (education requirement, five units, White Card; no date shown on the page).
- Service NSW, Apply for an owner-builder permit (last published 14 September 2026).
- ASQA, Users’ Guide to the Standards for Registered Training Organisations (RTOs) 2015 (v2.3).
- ASQA, A review of issues relating to unduly short training (strategic review report, 2017; listed on ASQA’s past strategic reviews page, last updated 27 March 2026).
- ASQA, Risk priorities 2025-26 (last updated 22 July 2026).
- ASQA, Risk priority: quality, sufficiency and fitness-for-purpose of training delivery (last updated 22 July 2026).
- ASQA, Make a report and Contact us.
- National Training Register, training.gov.au.
