Free Owner Builder Calculators & Planning Tools

Planning your own build in NSW? These free tools help you work out how much material to order, set and track a build budget, compare trade quotes, check a building contract before you sign and estimate what a new home costs to build. There are 17 material calculators covering concrete, bricks, blocks, framing, plasterboard, roofing, insulation, tiles, flooring, paint, decking, pavers, landscaping supplies, fencing, stairs and trims.

No sign-up, and they work on your phone on site. Anything you enter saves only in your own browser. The tools are built by Safe Rite, an approved NSW owner builder course provider since 2011, with over 40 years in construction.

Material Calculators

17 quantity calculators for common owner builder jobs. Every default can be changed. Always confirm quantities with your plans and supplier before ordering.

Concrete Slab Calculator

Work out how many cubic metres of concrete to order for a house slab, garage floor, shed base or path.

 

Thickened edges and beams need extra – add them separately.

Footings & Post Hole Concrete Calculator

Concrete volume for round or square footings, piers, and fence, deck or pergola post holes.

 

Brick Calculator

How many bricks you need for a wall, after deducting windows and doors.

 

48.5/m² suits a standard 230 × 76 mm brick, 10 mm joints, single skin.

Concrete Block Calculator

How many concrete blocks you need for retaining walls, garden walls and block-work.

 

12.5/m² suits standard 390 × 190 mm blocks with 10 mm joints.

Wall Framing Calculator

Number of studs and lineal metres of top and bottom plates for your wall frames.

 

Excludes noggings, lintels and bracing – check your framing plans.

Plasterboard Calculator

How many plasterboard sheets to order for walls and ceilings.

 

Roofing Sheet Calculator

Number of metal roofing sheets for a gable or skillion roof.

 

Check your profile’s cover width (e.g. corrugated vs trapezoidal) with the supplier.

Insulation Batts Calculator

Packs of wall or ceiling insulation batts to cover your area.

 

Coverage per pack varies by product and R-value – check the label.

Tile Calculator

Number of floor or wall tiles, with an allowance for cuts and breakages.

 

Flooring Calculator

Boxes of timber, hybrid, laminate or vinyl plank flooring for your floor area.

 

Paint Calculator

Litres of paint for walls and ceilings, based on the number of coats and coverage.

 

Check the coverage on your paint tin – it varies by product and surface.

Decking Calculator

Lineal metres of decking boards, allowing for board width and gaps.

 

Paver Calculator

Number of pavers for patios, paths and driveways, including joints.

 

Gravel, Sand & Soil Calculator

Cubic metres and tonnes of gravel, road base, sand, soil or mulch.

 

Densities are typical only – suppliers sell by m³ or tonne, so ask which.

Paling Fence Calculator

Posts, palings and rails for a timber paling fence.

 

For lapped palings, enter the overlap as a negative gap (e.g. -25).

Stair Calculator

Number of risers and treads, stringer length, and a check against common NCC limits.

 

Common NCC limits for houses: riser 115–190 mm, going 240–355 mm, 2R+G 550–700 mm. Confirm with your certifier.

Skirting & Architrave Calculator

Lengths of skirting boards and architraves to buy for your rooms and doors.

 

Architraves allow about 5 m per door side (two legs + head).

Owner Builder Budget Planner

Set a budget for each item, then enter what you’ve actually paid as invoices come in. Add or remove items to suit your build. Your figures save automatically in this browser.

Pre-loaded with 30 common owner builder costs across 7 stages: approvals, fees & insurance; site & slab; frame & roof; lock-up & services; fit-out; finishes; and external works & handover.

 
 
ItemBudget ($)Actual paid ($)Variance
Loading…

Most owner builders should hold a contingency of at least 10–15%. Variance shows actual paid minus budget: red means over budget.

Trade Quote Comparison

Compare up to three quotes for the same job. The cheapest price isn’t always best value – check what each quote includes, the timeframe and the warranty.

 Quote 1Quote 2Quote 3
Trade / business
Price ($)
Includes GST?
Timeframe (weeks)
Warranty (years)
Licence checked?
Price incl. GST   
 

Prices without GST are converted at 10%. Check a licence on Service NSW before you sign.

NSW Building Contract Checklist

Work through this before you sign with a builder or trade. Mark each item Done, Ask (you need an answer first) or N/A. Everything marked Ask becomes your list of questions to send before signing. Progress saves in this browser.

 

 

Licence & business checks

The contractor’s licence is current and in the same name as the contractSearch their name or licence number before signing. Check a licence – Service NSW ↗
The licence class covers this type of workA licence for one trade doesn’t cover another. Check a licence – Service NSW ↗
ABN is active and matches the business nameUse ABN Lookup. Choosing a builder or tradesperson – NSW Gov ↗
You have more than one written quote for comparisonUse the Quote comparison tab. Choosing a builder or tradesperson – NSW Gov ↗

The contract document

There is a written contract (required for work over $5,000)Small jobs and large jobs have different requirements. NSW guide to home building contracts ↗
You received the Consumer Building Guide (work over $5,000)The contractor must give it to you before you sign. NSW guide to home building contracts ↗
The full scope of work, plans and specifications are listedAnything not written down may not be included. NSW guide to home building contracts ↗
The contract price is clear, with exclusions listedCheck whether GST is included. NSW guide to home building contracts ↗
Prime cost and provisional sum items are listed with amountsThese allowances often change the final price. NSW guide to home building contracts ↗
Variations must be agreed in writing before work startsGet the price of every change in writing. NSW guide to home building contracts ↗

Money & insurance

The deposit is no more than 10% of the contract priceNSW caps deposits at 10% for home building contracts. NSW guide to home building contracts ↗
Progress payments are linked to stages of completed workNever pay ahead of work done. NSW guide to home building contracts ↗
Home building compensation (HBC) insurance certificate received before paying anything (work over $20,000)Check the certificate number on the public HBC register. Home building compensation – SIRA ↗
The name on the HBC certificate matches the contract and licenceA mismatch can leave you uninsured. Home building compensation – SIRA ↗
Public liability / contract works insurance is confirmedAsk for certificates of currency. Choosing a builder or tradesperson – NSW Gov ↗

Time, warranties & disputes

Start and finish dates (or a timeframe) are statedCheck how delays are handled. NSW guide to home building contracts ↗
You understand the 5-business-day cooling-off period (contracts over $20,000)The contract must explain it. NSW guide to home building contracts ↗
Statutory warranties and the defects process are understoodWarranties apply under the Home Building Act. Home Building Act 1989 (NSW) ↗
There is a clear dispute resolution processKnow who to contact if things go wrong. NSW guide to home building contracts ↗

Owner builder – trade contracts

It’s clear who supplies materials, and who orders themAvoid double-ordering or gaps.
Safe Work Method Statements (SWMS) are provided for high-risk workRequired for high-risk construction work.
Compliance certificates are included at completion (e.g. electrical, plumbing)You’ll need these for your certifier.
Site clean-up and waste removal are includedSkip bins can add up.
 

General information only, based on NSW Government guidance – not legal advice. Thresholds and rules can change; follow the links to confirm, and get independent legal advice for large contracts.

Cost Guide

A rough cost range for building a new home in NSW, based on floor area and finish level. Ranges are based on published 2026 industry cost guides and include a builder’s margin – your costs will depend on your site, design, location and the trades you engage. Use it for early planning only and get detailed quotes before you commit.

 

Owner builder calculator FAQs

Are these owner builder calculators free?

Yes. All the calculators, the budget planner, the quote comparison, the contract checklist and the cost guide are free to use with no sign-up. Anything you type is saved only in your own browser, not sent to us.

How accurate are the material calculators?

They give a good estimate for planning and pricing, using standard rates such as 48.5 bricks per m² and a waste allowance you can change. Always check quantities against your plans and with your supplier before you order.

How much does it cost to build a house in NSW?

It depends on size, site, design and finish level. Our cost guide uses ranges of about $2,000 to $7,000 per m² for construction only, from basic project homes up to custom homes. Land, site costs, approvals, landscaping and pools are extra, so get detailed quotes before you commit.

What should I check before signing a building contract in NSW?

Check the contractor’s licence on Service NSW, get a written contract for work over $5,000, keep the deposit to no more than 10%, and for work over $20,000 get the home building compensation insurance certificate before you pay anything. Use the contract checklist above to work through each item.

Do I need an owner builder permit in NSW?

You need an owner builder permit to do or supervise work valued at over $10,000 on your own home when you are not using a licensed builder. If the work is $20,000 or more, you must also complete an approved owner builder course before you apply.

Building as an owner builder in NSW?

Get the approved NSW Owner Builder Course plus a full project management platform – register free, pay $189 only when you pass.

See the NSW Owner Builder Course

web counter