Yes. A current White Card (general construction induction card) is mandatory for every owner builder permit application in NSW, and Building Commission NSW will accept a SafeWork NSW Statement of Training issued within 60 days before your application while your card is on its way. The White Card is a separate requirement from the owner builder education course, which applies if the work is $20,000 or more.
As of November 2026. This is general information. Check the official pages linked below before you apply.
White Card rules at a glance
| What it is | A general construction induction card, issued by SafeWork NSW after training with an RTO |
| Needed for an owner builder permit? | Yes, for every application. A Statement of Training issued within 60 days before you apply is also accepted |
| Same as the owner builder course? | No. The course is five units of competency and applies if the work is $20,000 or more |
| Interstate cards | Can be used for work in NSW. For permit applications, accepted in certain circumstances |
| Digital card | Optional. It does not replace your physical card – have your physical card ready when you apply. |
| Validity | Void if you have not done construction work for two consecutive years or more |
| Lost card | Replace online through Service NSW (a fee applies) |
| Minimum age | 14 for a White Card, 18 for an owner builder permit |
White Card or owner builder course: what’s the difference?
A White Card comes from general construction induction training with a Registered Training Organisation (RTO). SafeWork NSW issues the card, and the RTO submits your application to SafeWork NSW for you. The owner builder education requirement is different: it is five units of competency, and it applies if the work is valued at $20,000 or more.
For a permit application, you need both when they apply to you: a current White Card, and the education requirement if the work is $20,000 or more. The official pages list the White Card as something you must hold when you apply, and do not make it a condition of starting an owner builder course. You do not need a White Card to enrol in the Safe Rite NSW owner builder course.
The full application steps are in our guide to how to get an owner builder permit in NSW.
Are interstate White Cards accepted in NSW?
Often, yes. SafeWork NSW says construction workers can work in NSW using construction induction cards issued by other states and territories, and Service NSW says to check that your card is valid.
For an owner builder permit, Building Commission NSW says it will also accept, in certain circumstances, interstate general construction induction training cards. The page does not list those circumstances, so check with Building Commission NSW on 13 27 00 before you rely on an interstate card.
Do I need a digital or physical card?
SafeWork NSW says the digital White Card is optional and does not replace your physical card. You can use either to show and verify your credentials. Once you receive your card, you can access it digitally through the Service NSW app.
Keep your physical card ready too. The digital card is optional and doesn’t replace it.
How long is a White Card valid?
The official pages do not give an expiry date. SafeWork NSW and Service NSW say a White Card becomes void, and you must retrain, if you have not carried out construction work for two consecutive years or more. Service NSW lists a “current and valid” White Card as an eligibility requirement for the owner builder permit.
How do I replace a lost White Card?
If your card has been lost, stolen, damaged or destroyed, you can order a replacement online through Service NSW, as long as your details match those on your card. If your address or contact details have changed, update them first. The replacement is sent to your postal address, and a fee applies (see the Service NSW page). If your card contains errors, call SafeWork NSW on 13 10 50.
How do I get a White Card, and how long does it take?
- You must be 14 or over.
- Find an RTO using SafeWork NSW’s online search or the “Find an RTO” button on the Service NSW page.
- Give the RTO 100 points of ID. The course fee is set by the RTO.
- Complete the training. The RTO sends your application to SafeWork NSW and gives you a statement of training, valid for 60 days.
- Your card usually arrives within 30 days. If it doesn’t, call SafeWork NSW on 13 10 50.
White Card training must be delivered live by a trainer, either in a classroom or, with approved providers, in a live virtual classroom. A self-paced online White Card course isn’t accepted in NSW (see SafeWork NSW’s conditions for training providers). Courses run on weekdays, weeknights and weekends, so you can fit one around work.
Fees vary by provider; many charge between about $90 and $190. SafeWork NSW also charges an administration fee for the White Card application, which your training provider pays when it submits your application. Providers may include that fee in the course price or charge it separately, so check with each provider before you book.
SafeWork NSW’s conditions for training providers say general construction induction training must run for at least six hours, not counting breaks and registration, so plan on about 6-7 hours.
Tip: Book your White Card early. Most cards arrive within 30 days, and the Statement of Training covers you for 60 days if you apply before the card arrives. (Source: SafeWork NSW white cards page.)
Frequently asked questions
Is a White Card the same as the owner builder course?
No. The White Card is general construction induction training. The owner builder course covers five units of competency and applies if your work is $20,000 or more. See our owner builder FAQs for more on the course.
Can I apply for my permit before my White Card arrives?
Yes, if you have a SafeWork NSW Statement of Training issued within 60 days before your application. Building Commission NSW accepts it in place of the card.
How much does a White Card cost?
Fees vary by provider; many charge between about $90 and $190. Service NSW and SafeWork NSW say each provider sets its own fee. There is also a SafeWork NSW administration fee for the card application, so check whether your provider includes it in the course price.
How old do I need to be?
You must be 14 or over to hold a White Card, and 18 or over to hold an owner builder permit.
What if I haven’t worked in construction for two years?
Your White Card becomes void if you have not carried out construction work for two consecutive years or more, and you must retrain.
Next steps
Once your White Card is sorted, follow the steps in our owner builder permit guide. If your work is $20,000 or more, the Safe Rite NSW Owner Builder Course (RTO 45002) covers the education requirement: register free and pay $189 when you pass, or choose PRO Level at $170 paid upfront.
Sources
- SafeWork NSW, White cards (no date shown on the page).
- SafeWork NSW, Conditions for registered training organisations delivering general construction induction training in NSW (effective 1 October 2022).
- Service NSW, Apply for a general construction induction card (white card) (last published 1 May 2026).
- Service NSW, Replace a general construction induction card (white card) (last published 28 November 2025).
- Service NSW, Apply for an owner-builder permit (last published 14 September 2026).
- NSW Government, How to apply for an owner-builder permit (no date shown on the page).
